top of page
Search

AE86 Electrical: Wiring Up Your Kouki Bumper Indicator Lights

Updated: Sep 12

If you've converted the front end of your non JDM AE86 to the JDM kouki front bumper w/ Turn Indicator Lamps, then you may be one of those who want those Signal Lamps to operate in the manner they were originally intended. Things you'll need: 1. The "schematic" provided in this article

2. Minimum 16 gauge wire

3. Wire cutters/dikes

4. Butt-end crimps & crimpers OR soldering iron 5. Heat shrink / electrical tape

6. 2x 8-pin 12v DPDT relays

7. Female spade connectors OR 8-pin relay, base mount w/ slotted aluminum DIN rail


When all is said and done, you'll know you've wired everything up correctly if their operation is as follows: Lights OFF

Left/Right Turn signal ON = Left/Right Large White Lamp on + Left/Right Large Amber blinking


Running / Headlights ON

Left/Right Small Amber Constant on + Left/Right Turn signal ON = Left/Right Large White Lamp on + Left/Right Large Amber blinking

The wire-up diagram should be pretty straight forward but feel free to ask questions in the comment section.





363 views3 comments
bottom of page